T gauge Signal Lights

Here's the place for discussions about those 3D creations for Tguage...and lets not forget the trials and tribulations of designing and printing.
Post Reply
gbtrains
Posts: 302
Joined: Sat Jul 02, 2016 6:21 pm

T gauge Signal Lights

Post by gbtrains »

Hi there
I have just posted onto the Shapeways site a couple of t gauge signals.
1. Gantry Pigeon Signal
2. Signal Gantry rack ...span of 3 tracks easy.

and hope to place more on soon


ps They are very small so be careful and get the tweezers out and are made from white plastic/frosted ultra/frosted extreme materials. :D

Regards
Graham

gbtrains
Posts: 302
Joined: Sat Jul 02, 2016 6:21 pm

Re: T gauge Signal Lights

Post by gbtrains »

Please check out my you tube for the following videos on my Working Buffer End Light and a Signal Light in Green.
please use below links.

https://youtu.be/prjh6AsJm0M

https://youtu.be/lgbLfkSCtOI


Also here is a couple of pics that you may want to look at.

Just nee to work out how to get 2 or more lights onto the small area for the signals to come to life.

I have used pico led on a 3.5 volt system so that they will not get hot at all and also i can work them into the track as is will be on the same voltage.




ps will not be using blue tak on layout .
Regards
Graham
Attachments
buffer Light-02.JPG
buffer Light-02.JPG (1.77 MiB) Viewed 433 times
Buffer Light-01.JPG
Buffer Light-01.JPG (1.83 MiB) Viewed 433 times
Buffer &Signal Light-01.JPG
Buffer &Signal Light-01.JPG (1.79 MiB) Viewed 433 times
Buffer & Signal-02.JPG
Buffer & Signal-02.JPG (1.81 MiB) Viewed 433 times

gbtrains
Posts: 302
Joined: Sat Jul 02, 2016 6:21 pm

Re: T gauge Signal Lights

Post by gbtrains »

sorry
pico's are in fact 3 volts so will have to run seperate power.

Graham :o

gbtrains
Posts: 302
Joined: Sat Jul 02, 2016 6:21 pm

Re: T gauge Signal Lights

Post by gbtrains »

HI People of T Gauge.
Just to update you all on the signal gantry lights.

Got a 3 aspect gantry light to now work
please check out the following links to the youtube:-

https://youtu.be/UoVRWemCiLM

https://www.youtube.com/watch?v=RzrHhMZh8BM

https://www.youtube.com/watch?v=gVmhZhtT9nQ

:P


Regards
Graham

Post Reply