My new T gauge locomotive is completed. It's not perfect I know, but I am pretty pleased with how she turned out. Body shell by Shapeways and no brush ever touched the model. That was a decision I took right from the start. As always, don't get too close. I have just finished a set of Mk1 Crimson and Cream coaches using Captain Electra's vinyl overlays. photos to follow.
I thought about painting the bogie side frames black but decided not..in case paint got into the wheel bearings. It really need some of Alan's fancy new 2nd gen black bogies
A very good job on this loco. Also good to see a video of it running.
As for painting the bogies black. I did this on my Warship chassis (viewtopic.php?f=8&t=122). I did it with black acryllic paints (vallejo) and built it up slowly using an almost dry brush to avoid the paint getting where it should not. By taking my time this was easy to do without causing any problems, but still give good coverage. Overall I think this would be easier that dismantling the chassis so as to fit black bogies.
A very quick and simple way of colouring bogies (and chassis underframes) black is to just use a black permanent marker pen. The hard-to-reach bits remain grey, but that simply tends to highlight the detail.
Here's a very aged result of my only attempt at painting bogies:
babybogie.jpg (53.18 KiB) Viewed 8098 times
When I made my Baby Deltic justover a year ago, I painted the bogie sides ( and underframe) with matt black Humrol...using a very fine brush and a steady hand! There was no issues with paint getting on the surfaces of the metal axle holders. The smallest amount of paint applied carefully under magnification.
Note how the paint has worn, giving a rather weathered appearance. And look at those dirty wheels! And that lump of vegitation that's been collected! Kids put it on the line, most likely...
And believe it or not....that light green line was hand painted!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk