GERMAN Schnellzuglokomotive BR01 steam loco

Post details of your rolling stock developments - locomotive, carriages, DMUs, etc.
rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

Hello,

when I found the new steam wheels at tgauge.com I reanimated my dream of the steam loco BR01:
BR01.jpg
BR01.jpg (112.91 KiB) Viewed 773 times
The N model at scale 1:160 was scanned via 3D scanner, downsized to 1:450 and printed
BR01_160_450_0.jpg
BR01_160_450_0.jpg (759.4 KiB) Viewed 773 times
A hellow cylinder with diameter of 4mm was placed within the steam boiler and a servo motor was inserted.
450_3X_0.jpg
450_3X_0.jpg (713.98 KiB) Viewed 773 times

Next steps will follow soon.


BR,

Siegfried

Kupzinger
Posts: 79
Joined: Sat Apr 30, 2016 9:41 pm
Location: Vienna, Austria

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Kupzinger »

Hey cool! A steam wheel project! I am very curious how it goes on. The first images look very promising!
Cheers
Kupzinger

Switcher102
Posts: 37
Joined: Sat Aug 13, 2016 8:25 am

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Switcher102 »

Oh yes, this looks fascinating. Keep an eye on this one. I'm intrigued by that thin motor with the worm screw. Never seen one of those before. Where does that come from?

Rich

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

Hi Rich,
this motor comes from Hobbyking Ultra-Micro Digital Servo HK-5330
BR,
Siegfried

Switcher102
Posts: 37
Joined: Sat Aug 13, 2016 8:25 am

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Switcher102 »

I see; it's the motor out of the servo. Is that a motor and gearbox and did it have the worm already on it?

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

It is a motor without gearbox and the worm was pressed on by me

Switcher102
Posts: 37
Joined: Sat Aug 13, 2016 8:25 am

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Switcher102 »

Gosh, a worm that small would come in handy for me. Where did you get it from? Can you get gears that small aswell from the same place? I'd love to be able to get the gears that make up a T gauge motor system separate rather than buy a system and take it apart.

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »


rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

More than 1 year ago I did some exercises in developing a steam wheel driven chassis:
Antrieb02.jpg
Antrieb02.jpg (310.8 KiB) Viewed 12175 times
Antrieb03.jpg
Antrieb03.jpg (145.24 KiB) Viewed 12175 times
Treibachse_BR01.jpg
Treibachse_BR01.jpg (335.14 KiB) Viewed 12175 times
Now I will do it again with the new steam wheels from Tgauge.com

BR,

Siegfried

Switcher102
Posts: 37
Joined: Sat Aug 13, 2016 8:25 am

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Switcher102 »

Thanks very much for the link Siegfried. My browser won't show the photos, don't know why. I'm hoping to see some of this tiny gear stuff at a show shortly here in the UK called the Warley Show.

Very interesting what you are doing. I presume the Shicoh motor and gearbox is too awkward to alter to fit.

Rich

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

I just started the new chassis frame
Chassis00.jpg
Chassis00.jpg (43.32 KiB) Viewed 10983 times
BR,

Siegfried

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

The new gearing should work like this
chassis_02.jpg
chassis_02.jpg (72.95 KiB) Viewed 10933 times
BR,

Siegfried

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

To optimise speed reduction the best will be using Z=17 for all gears
BR01_Z17.jpg
BR01_Z17.jpg (51.01 KiB) Viewed 10860 times

BR,

Siegfried

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

To do first prototyping I just ordered this chassis
Chassis03.jpg
Chassis03.jpg (24.73 KiB) Viewed 10103 times
from shapeways as a raw brass printout

BR,

Siegfried

JoeMalinchak
Posts: 118
Joined: Thu Jun 04, 2015 8:35 am
Location: Greenfield TWP, Pennsylvania (Near Scranton)

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by JoeMalinchak »

You are doing a great job on the design of your BR01 steam loco! I like your gear drive using the Z=17 gears. Looking forward to seeing your test results on this set up. Did you purchase all of the gears from the link you provided in an earlier post, and do you have a part number for them?

Joe.

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

Hi Joe,
I purchased all of the gears from the link I provided in an earlier post.
I do not have partnumbers - select a gear, select the parameters and put it in the shopping basket.

BR,

Siegfried

Slarge
Posts: 30
Joined: Thu Nov 14, 2013 8:22 am

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by Slarge »

Awesome work, would love to do the same!
Have you considered the wheel spacing to suit the drive rods in the tgauge shop? I believe its 5.25mm centres.
http://www.tgauge.com/product/327/0/val ... 7210b882bd
How do you plan to pick up power? I was considering a permanently wired connection from standard eishindo bogies on the tender.
Love the work, look forward to seeing it progress.

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

I have to design and to produce my own Valve Gear by chemical etching because the BR01 wheel spacing is about 5,11mm

My plan is to pick up power from the front double bogie and from the rear single bogie or from the tender bogies.

The are some test to do!

BR,
Siegfried

rail450
Posts: 109
Joined: Thu Oct 27, 2016 7:05 pm

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by rail450 »

I just received my firt chassis from shapeways as a raw brass printout.

> It fits into the BR01 corpus

> the motor is been held in the correct position

> all drill holes and slots have to bee reworked because they are undersized

Chassis0.jpg
Chassis0.jpg (172.69 KiB) Viewed 8641 times
Chassis1.jpg
Chassis1.jpg (288.61 KiB) Viewed 667 times
Chassis2.jpg
Chassis2.jpg (401.11 KiB) Viewed 667 times
Chassis3.jpg
Chassis3.jpg (291.34 KiB) Viewed 667 times


BR,

Siegfried

msimister
Posts: 95
Joined: Sun Jun 21, 2015 6:18 pm
Location: Melbourne, Australia

Re: GERMAN Schnellzuglokomotive BR01 steam loco

Post by msimister »

Amazing! Fabulous Siegried, fabulous. Looking forward to seeing the finished loco.
Malcolm

Post Reply