LED Street Lighting on my layout

Post details of your T gauge layouts and the progress you are making.
Post Reply
User avatar
Towers
Posts: 27
Joined: Wed Nov 13, 2013 11:49 pm
Location: Edgware
Contact:

LED Street Lighting on my layout

Post by Towers »

I found recently on eBay someone selling 1:500 scale LED street lighting. It was direct from China so the price was super cheap. I thought I'd order some, well 30 of them, only £15 with free P+P!!! They arrived today and I have now installed 13 of them so far and I have to say I am very impressed. The only issues were that the angle of the street lights needed a bit of adjustment and they needed painting as the lamp covers are made of copper and it would look a bit weird leaving them as is. They run on 3v, so I nipped into poindland to grab whatever item used 2 AA or AAA batteries and nabbed it to get the battery housing out of it.

After lots of soldering, its now done. Maybe at some point I'll work out how to hook it up to the USB 5v power supply already in the case and add a switch to it and maybe a variable power knob to make them a bit dimmer.
IMG_1671-2.jpg
IMG_1671-2.jpg (80.52 KiB) Viewed 3811 times
IMG_1672-2.jpg
IMG_1672-2.jpg (113.02 KiB) Viewed 3811 times
IMG_1673-2.jpg
IMG_1673-2.jpg (54.55 KiB) Viewed 3811 times
IMG_1674-2.jpg
IMG_1674-2.jpg (56.61 KiB) Viewed 3811 times
IMG_1676-2.jpg
IMG_1676-2.jpg (68.79 KiB) Viewed 3811 times

mattd10
Posts: 205
Joined: Wed Nov 13, 2013 10:12 pm
Location: West Sussex, UK
Contact:

Re: LED Street Lighting on my layout

Post by mattd10 »

What a great find! I agree that they maybe need to be toned down a touch, but I'm sure fitting a variable resistor in the circuit or even just powering it from one battery will help! Always love night shots of a layout!

User avatar
dkightley
Posts: 1247
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: LED Street Lighting on my layout

Post by dkightley »

For anyone wanting to have a go at diy lighting columns, the smallest leds available at present seem to be 1.0mm x 0.6mm x 0.5mm. One supplier on Ebay:
http://www.ebay.co.uk/itm/C0402W-20pcs- ... 19f1b8092d

You'll just need some micro bore brass tubing...and hours of patience!


Now if I had unlimited time and resources, I'd go for a couple of thousand of these for The Bridge.....wouldn't it look good, though?! :shock:
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

Post Reply