My T gauge adventure

Post details of your T gauge layouts and the progress you are making.
NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I have now put my remaining 1930s models (Austin 7s) up on Shapeways.

Direct link to this model in my shop: http://shpws.me/M8U1

I have printed these but have not yet had a chance to paint them. When I have done so I will load some pictures.

Currently in my shop as a set of 3 models, but as always, if anyone want a different quantity or a different mix of models then just ask.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I have placed an order at tgauge.com for a pack of adjustable chassis. I guess I was tired of moving the single chassis I had between the bodies I have made or bought each time!

The parcel may be here already. I had a card through the door whilst I was out to say there is an item to sign for at the sorting office. Do tgauge.com send out parcels needing a signature? So long since I placed an order I can not remember.

Either way I will now have 4 new chassis, and will have to decide what to build on them.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

jerrybigcat
Posts: 19
Joined: Thu Nov 14, 2013 2:04 pm

Re: My T gauge adventure

Post by jerrybigcat »

They require signatures.

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

A quick 'whats on my workbench' photo. I am currently getting stuck in painting a batch of road vehicles and accessories. Show here after the first coat of paint, so still need windows, wheels and details painting in. Some of the other models I am also painting at the same time (not shown in this photo) have been cleaned in hot water rather than white spirits, which leaves the prints clear so for those I will just need to paint round the windows. ('just' being a relative term in T - where is that 00000 brush?)

For Forum - Painting.jpg
For Forum - Painting.jpg (217.49 KiB) Viewed 12716 times
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

One photo that I have not shown yet on the forum, my boxcar painted and mounted on a cut down 19m chassis.
For Shapeways - Boxcar.jpg
For Shapeways - Boxcar.jpg (134.96 KiB) Viewed 12690 times
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

And another photograph of my models.

These are a couple of Austin 7s which I painted for Doug. Shown are the convertible (with the printed screen) and the van, I have yet to paint a saloon but that will be in my next batch.
For Shapeways - A7 x 3.jpg
For Shapeways - A7 x 3.jpg (96.67 KiB) Viewed 12642 times
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

The end of the week, so I thought I would add a preview of a vehicle that I am currently working on.

Not for sale just yet, as can be seen it still needs some obvious details, i.e. wheel centres, spare wheel on bonnet etc. But when done should be useful if anyone is planning a military train (I have just put my 1/450 Land Rover Ambulance for sale in a pack of 6 for the same reason)
For Forum - Kubelwagen in progess.jpg
For Forum - Kubelwagen in progess.jpg (10.19 KiB) Viewed 12556 times
Once the common details are complete I plan to get two different models from this, one with the hood up, and also one with the hood down which will have a visible interior (which I know is possible because I did it on my Austin 7 Tourer.


I am still working on my wartime bus. Also, have now taken delivery of a pack of adjustable chassis I do have other plans for US and UK outline freight stock, with a spread from the 1930s through to the current day.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

As promised in another thread, here is the first of the designs for rolling stock that I am hopeful will all be completed this week.

Our laptop is on its last legs and about to expire soon. The laptop I had borrowed, which I could have used as a backup, needs to be returned. Hence the push to get these models complete. If all get done there will be 2xUS and 1xUK.

This is the first of those models. A 40ft wagontop boxcar from the steam/early diesel era. This has been designed to fit the adjustable chassis, but will equally well fit the 19m coach chassis. This, and the other two models I hope to release this week, are all available as a single model or as a set of 3 (to reduce the unit cost per model). If anybody wants a different quantity then just ask.
For Forum - Wagontop Boxcar.jpg
For Forum - Wagontop Boxcar.jpg (16.79 KiB) Viewed 12491 times
Single model: http://shpws.me/MvxK
Set of 3: http://shpws.me/MvxM
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

The second of three promised models. This time a UK wagon from modern times, a nuclear flask wagon.

Something a bit different, but these do get seen on a number of routes across the country. Also they tend to be in short trains (would not want too much of this stuff in one place at one time!), so easy to model the whole train.
For Forum - Nuclear Flask Wagon.jpg
For Forum - Nuclear Flask Wagon.jpg (14.17 KiB) Viewed 12478 times
As before the model is available in my shop singly http://shpws.me/MvK4 or as a set of 3 http://shpws.me/MvKk
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

User avatar
dkightley
Posts: 1241
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: My T gauge adventure

Post by dkightley »

And I wonder who will be the first to recreate "Operation Smash Hit" in T gauge??? ;) ;) ;)

Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

The last one for now. Back to the US again, a 4 tub pickle car. This is a distinctive freight car from the steam era.

This has been on my shop for a few hours, and has already sold one set of 3.
For Forum - Pickle Car.jpg
For Forum - Pickle Car.jpg (15.04 KiB) Viewed 10085 times
Single model: http://shpws.me/Mvze
Set of 3: http://shpws.me/MvCI

No more freight cars for a bit now. What I am planning on working on next is a dummy US diesel body shell. Dummy in that it can not be powered (too small for the current range of powered chassis), but will need to be propelled by a powered boxcar or similar.

As always, if you want any of these models in a different number other that 1 or 3 then just ask and I will see what I can do. Also if you have any ideas for other rolling stock you are needing then again just ask, it may be I have already has some ideas about the same vehicle and have started planning how I would create it, in which case it may not take long to complete it.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I had been planning on an update, even though I do not really have anything dramatic to report, just to put some traffic on the forum which seemed all quiet again for a week or so. However in the last few days the number of posts seems to have picked up again.

That being said, what I have been up to is placing a couple of orders.

I have ordered a selection of my own models from Shapeways to build up my rolling stock collection. The only new item here is a road vehicle - I will see if this prints successfully or not before showing it here.

My other order was for electronic components. I had been developing a pulse width modulation (PWM) controller runing from an Arduino. The coding has been done for some time, but not having a motor driver it is currently just in 'test mode' varying the brightness of an LED rather that driving a loco. Hopefully when this order arrives I will be able to complete it.
The design I came up with harks back the H&M Duette controller which I have used for many years in the larger scale, i.e. a nice rotary control operating as centre off. I have built some constants into the program (values that do not normally change, but can be altered during testing). The first is the amount of revolution of the potentiometer either side of centre that is regarded as being off - the old duette has a positive click stop for off, but the one I am using does not so needs a clearer indication. Also I have a constant for the minimum voltage which will start the motor - to avoid having to turn it even more to then get something moving - which will be set on a trial and error basis. My design also has 3 other LEDS for off, left and right so that I can see what should be happening.

Hopefully I will have another update when I have received and painted my rolling stock, or have completed a working controller.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

Following a successful print in my latest order to Shapeways I have just added these models into my shop - 6 WW2 Kubelwagens, 3 open and 3 closed;
For T gauge forum - Kubelwagens.jpg
For T gauge forum - Kubelwagens.jpg (18.68 KiB) Viewed 9924 times

The batch of models I printed also included some more of the latest rolling stock that I have designed (and that are already in my shop), I plan to get these painted very soon and in place on their chassis. Once done I will get some photos uploaded.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I have finally got round to photographing some my rolling stock that I have painted and fitted on chassis. Two for now, with a couple more to come soon.

First up is the Nuclear Flask Wagon. I painted this with Vallejo acrylics (my paint of choice for Shapeways FUD) and used an adjustable chassis.
For Forum - Nuclear Flask Wagon.jpg
For Forum - Nuclear Flask Wagon.jpg (54.9 KiB) Viewed 9337 times
Secondly, quick trip across the atlantic and back in time for a 4 tub pickle car. I have always thought that these car were full of character when I saw them in HO or N, and am pleased that they worked out very well in T.
For Forum - Pickle Car.jpg
For Forum - Pickle Car.jpg (58.12 KiB) Viewed 9337 times
Finally a quick view on how I fit the adjustable chassis to these wagons. I believe that the recommended method of cutting according to the instructions is to cut the chassis from the other end. However doing this would still leave it over long for the scale length rolling stock I have designed, therefore I just cut off the long end instead. Separating and reattaching the bogie/truck works exactly the same, so it is no more difficult overall.
For Forum - Nuclear Flask Wagon Chassis.jpg
For Forum - Nuclear Flask Wagon Chassis.jpg (60.75 KiB) Viewed 9337 times
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

The remainder of the photos I have taken;

The last of the rolling stock is the 40' wagontop boxcar which was a development, if my memory serves me right, by the Baltimore & Ohio railroad to try and stop the water leakage that was occuring on the then current boxcars between the roof and the top of the side panels
For Forum - Wagontop Boxcar.jpg
For Forum - Wagontop Boxcar.jpg (56.9 KiB) Viewed 9312 times
Final shot - this is just a TEST! This was another of those where the 3d model was partially complete when I was ready to print a batch of models, and as it was only a few pence extra to add this in it seem daft not to do so just so I could see how it was looking. Currently the model is just plain with no details at all (radiators, chimneys, cab windows, tool boxes, fuel tanks etc), also the cab roof needs raising slightly to correct the proportions. Other than that it does fit perfectly on the chassis - this is of course a dummy model, the hood being too narrow to fit the current chassis, so will need to be propelled by a powered boxcar (which I already have, just did not have it to hand for the photo.
For Forum - NW2 test.jpg
For Forum - NW2 test.jpg (60.01 KiB) Viewed 9312 times
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I have just sent another order off to Shapeways. This was an order I put together quickly whilst it would still qualify for the free postage offer for own designs only, which ended yesterday.

In the batch were various assorted items, but for T it included reprints of the Kubelwagens I had printed earlier - these were unchanged except for the simple addition of a painting handle, which I had managed to miss off first time around. I also added an in progress model of a Bedford OWB wartime coach - progressed further than last time, but still not finished!

The main thing I was keen to test were T scale 'building kits'. Why do we need kits rather than completed buildings? The only reason for this line of thinking was that I am getting dangerously close to a layout which will need a town, and I thought that it would be easier to create a whole variety of different buildings for the town centre by designing, and then mixing and matching, separate components for front walls, side walls, rear walls and roofs. I will let you know how well this actually works out when my order is delivered.
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

NeilM
Posts: 181
Joined: Thu Nov 14, 2013 9:46 am
Location: North Yorkshire, UK
Contact:

Re: My T gauge adventure

Post by NeilM »

I am dangerously close to being able to show a photo of my layout, which is completed as far as having a complete loop of track. I tried to photograph this with my phone but that did not produce anything worthy of showing, so that will have to wait until I use a proper camera.

In the meantime I have made a fix to my T scale Kubelwagens, and have also added them on a sprue in readiness for the change Shapeways are planning for FUD/FXD which penalizes separate models;
Image
Neil

T gauge items in my Shapeways shop http://www.shapeways.com/shops/t450

Post Reply