1928 Rhine river cargo ship Cimbria in T-Gauge

Here's the place for discussions about those 3D creations for Tguage...and lets not forget the trials and tribulations of designing and printing.
Post Reply
Posts: 19
Joined: Tue Feb 28, 2017 4:24 pm

1928 Rhine river cargo ship Cimbria in T-Gauge

Post by PetrOs »


As the demand on my previous ship, tug Simla, was good in T-Gauge scale, I just released the rhine river cargo ship Cimbria from 1928 in T-Gauge also. See here: http://shpws.me/QQQ1

This little ship is a typical inland motor freighter designed in middle of the 1920es for european rivers. These were very numerous on Rhine, Danube, Seine, and all other waterways. These would also be found in coastal ports in major river estuaries, bringing the goods from inland factories, supplies and fuel to be exported on ocean ships, or picking foreign goods for inland customers.

This particular ship is based on the plans published in 1928 Werft Reederei Hafen magazine. A pair of fast inland motor ships, Cimbria and Normannia were built for N.V. Reederij v/h J.H.Koenigsfeld, Rotterdam in german Maschinenfabrik Christof Ruthof, Mainz-Kastel and Regensburg in 1928. These were designed to serve the overseas goods export business of the owners, bringing the cargo loads to Rotterdam from such major industrial centers like Strassburg, Frankfurt or Basel. They were built for rapid turnaround, and high speed for an inland ship. They were between the first diesel driven inland ships, as diesel engines made a good progress in the mid-20es, and were much easier to operate, reducing the harbor time.

The ships were 64,90 meter long overall, 8 meter wide, up to 2,65m draught, and could carry 767 tons on that draught. Their 600 Hp engines gave them 19,5kmh when loaded to the more usual 1,8m draught.
You do not have the required permissions to view the files attached to this post.

Post Reply