A model of a model of Blea Moor

Here's the place for discussions about those 3D creations for Tguage...and lets not forget the trials and tribulations of designing and printing.
Post Reply
martink
Posts: 272
Joined: Sun Feb 09, 2014 3:13 am
Location: Melbourne, Australia
Contact:

A model of a model of Blea Moor

Post by martink »

Over the years, many people suggested building an ultra-small scale model of a layout to try out the overall configuration and such. I've always thought that was a great idea, but way, way too much work for the return. However, with a 3d printer, the rules change...

I want to make Blea Moor/Ribblehead as large as possible, while still being able to fit in the car and be set up at home for testing. Determining the number and sizes of the boards to use becomes a lot easier with a mockup.
Since I tend to build my timberwork in inches and feet, I settled on 1mm to 1inch (1:25) as a really convenient scale for a mockup. All the CAD dimensions are simply in mm/inches.

One quick evening's work, and voila...
board-cad1.jpg
board-cad1.jpg (33.37 KiB) Viewed 3085 times
DSCI0040.JPG
DSCI0040.JPG (178.16 KiB) Viewed 2867 times

User avatar
dkightley
Posts: 1272
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: A model of a model of Blea Moor

Post by dkightley »

It's a very good way of visualising how things will go together....and I've done the same for my new layout:
OctViewB1.JPG
OctViewB1.JPG (56.94 KiB) Viewed 3074 times
The only difference is that I've not actually printed mine!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

Post Reply