Crescent Limited 4-6-2

Post details of your rolling stock developments - locomotive, carriages, DMUs, etc.
JoeMalinchak
Posts: 118
Joined: Thu Jun 04, 2015 8:35 am
Location: Greenfield TWP, Pennsylvania (Near Scranton)

Re: Crescent Limited 4-6-2

Post by JoeMalinchak »

I glue my wheels onto the axles using Gorilla glue. After gluing them on I place the model in this vise to keep them aligned while the glue dries. The glue sets up in 30-60 minutes. However, I was having a little problem with a few wheels sticking to the frame. I solved this issue by just running the motor for a few seconds every 10 minutes or so until the glue dries.
Attachments
IMG_8856.JPG
IMG_8856.JPG (128.87 KiB) Viewed 2475 times

wbnemo1
Posts: 3
Joined: Tue Dec 03, 2013 1:12 pm

Re: Crescent Limited 4-6-2

Post by wbnemo1 »

This is a very unique project, love seeing pieces being made like this!,😆

MMBUFBerlin
Posts: 100
Joined: Wed Nov 14, 2018 5:43 pm
Location: Berlin/Germany

Re: Crescent Limited 4-6-2

Post by MMBUFBerlin »

Hello Joe,
I let my gears with 0.6mm bore finished, so the wheels can be firmly pressed in without glue.
Kind regards
Uwe

Post Reply