Electrical connection

The place for general discussions and requests for help on all matters relating to T gauge.
Post Reply
Sallytrafic
Posts: 13
Joined: Wed Dec 04, 2019 5:16 pm

Electrical connection

Post by Sallytrafic »

Has anyone an idea where you can get a mating socket for the dc plug provided by the USB cable (E-300) or mains adaptor (E-001)which connects to the points switch or the pwm power box. I think the connector is a 1.7mm (but I'm guessing as I can't measure it) by 4mm. Here is the one from the points controller: Image

User avatar
dkightley
Posts: 1243
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Electrical connection

Post by dkightley »

I think an email to Alan at TGauge.com may give you then answer....

btw, your image is not showing. You uploaded it...and then used the wrong method to attach it to your post...resulting in it being lost. This thread shows how to do it: https://www.talkingtgauge.net/viewtopic.php?f=2&t=110
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk

Post Reply