Board index ‹ Talking T Gauge Forum ‹ T Gauge Custom Rolling Stock

[gbtrains]

Hi
I was wondering if any body could model up in T Gauge Class 37 and the Class 47 as I know that they will sell well, I will have to be made on a 19mm Chassis.

I know that a baby Deltic was created.

thanks

Graham

[ivanf]

Hi Graham,

snag with those is the bogies... the chassis needs to sit inside the cab ( so to speak ) but the bogies need to stick out in front under the bonnet.

I think some people have stuck hacked up a bogie and stuck half on the front to make a 3 axle bogie but don't know how succesful that's been.

there was a picture of a 3 axle bogie t-gauge chassis a while back but I don't know when that will be available.

Regards,

Ivan.

[gbtrains]

Hi Ivanf
Yep seen on you tube but they did it with front bogie of row of 3 fixed at front and back.

I have tried to glue the three bogie axle from T gauge but theses keep breaking up even with super glue ,have told them to do in thin brass to solve this problem.

Need to think on it then.

Thank you for comment.

Regards
Graham

[Kupzinger]

Hi Graham,

have a look here and scroll down a bit:
viewtopic.php?f=11&t=376

I am actually planning with the 16m chassis and will try to asymmetrically enlarge the boogies. If that is necessary at all.

If you are interested in a kit, please drop me a PM.
Cheers
Kupzinger

[dkightley]

I recently asked Alan at TGauge.com about the three axle bogies from Eishindo and he's advised that they are still in development...and unfortunately there's no availability date yet.

So...we'll have to patiently wait a little longer.

[gbtrains]

Hi Doug
Thanks for asking.

The plastic on three bogie wheels system just keeps on breaking.Need brass for better performance.

Will have to wait then.

Thanks for the answers people.

Regards
Graham

[gbtrains]

Hi all

Well I figuered out how to do the tripple boggie units,but not yet got them for wired as they are standard doulbe boggies , one cut down and then joined by super glue.
another of the Paint Shop Pro stuff that I am trying to get ready in the T Gauge Range.

ps just need to add in the buffers and pipes.

Hope you enjoy.

Regards
Graham

[gbtrains]

Hi Doug

I know that you are busy with printing,but I have yet got any prints done and I was wondering if you could design a class 37 from you baby deltic in the forum shop as I would like to get my hands on some asEWS Livery and Triple Gray.

ps have you also got any class 47 's in mind ?

regards
Graham