Board index Talking T Gauge Forum T Gauge Custom Rolling Stock

Post details of your rolling stock developments - locomotive, carriages, DMUs, etc.

Re: GG1

Postby MMBUFBerlin » Thu Apr 04, 2019 11:24 pm

Hey Joe, why so complicated, just make such metal plates as I do, for example, at the tender for the MALLARD, and then glue on them 3D printed blinds.

Mallard_TenderChassis.jpg
MALLARD tender chassis
Mallard_TenderChassis.jpg (367.95 KiB) Viewed 1037 times


You must to begin building something yourself, not ever only putting ready parts together!
MMBUFBerlin
 
Posts: 100
Joined: Wed Nov 14, 2018 5:43 pm
Location: Berlin/Germany

Re: GG1

Postby MMBUFBerlin » Thu Apr 04, 2019 11:41 pm

Such a metal plate can be produced in 10 minutes. You only need the scissors of a Swiss army knife and a center punch.
MMBUFBerlin
 
Posts: 100
Joined: Wed Nov 14, 2018 5:43 pm
Location: Berlin/Germany

Re: GG1

Postby MMBUFBerlin » Fri Apr 05, 2019 11:54 am

By the way, Alan works on new wheels, if you are waiting for something, you can build the GG1 prototypical and with better reduction. C + 1 should be suitable drive wheels.

53464676_2272098509518494_383144828361244672_o-1.jpg
new T gauge wheels
53464676_2272098509518494_383144828361244672_o-1.jpg (100.26 KiB) Viewed 1015 times
MMBUFBerlin
 
Posts: 100
Joined: Wed Nov 14, 2018 5:43 pm
Location: Berlin/Germany

Re: GG1

Postby JoeMalinchak » Sat Apr 06, 2019 6:39 am

Hi Uwe,

I may upgrade the GG1 to the scale size wheels at some point when they become available, good tip on the metal plates.

Joe.
JoeMalinchak
 
Posts: 118
Joined: Thu Jun 04, 2015 8:35 am
Location: Greenfield TWP, Pennsylvania (Near Scranton)

Previous

Return to T Gauge Custom Rolling Stock

Who is online

Users browsing this forum: No registered users and 0 guests


cron