Board index Talking T Gauge Forum T Gauge Layouts

Post details of your T gauge layouts and the progress you are making.

Re: Severn Valley Railway - Ironbridge Station

Postby dkightley » Mon Jan 08, 2018 9:57 pm

You're doing really well considering the pain you're constantly under....and I don't blame you for taking a day or two off. And I'm not ashamed to publically admit that I thought you were secretly 3D printing your buildings..when you were actually scratch building them!! :oops: :oops:

Best thing is to keep warm and keep doing the "Scrooge" hand exercise to keep your hands and fingers moving!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk
User avatar
dkightley
 
Posts: 1049
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Mon Jan 08, 2018 10:02 pm

dkightley wrote:You're doing really well considering the pain you're constantly under....and I don't blame you for taking a day or two off. And I'm not ashamed to publically admit that I thought you were secretly 3D printing your buildings..when you were actually scratch building them!! :oops: :oops:

Best thing is to keep warm and keep doing the "Scrooge" hand exercise to keep your hands and fingers moving!


Trouble is Doug, I like to try and do something everyday to stop myself getting bored. No I am not even attempting wheels on the Artic you sent me :shock: :shock:
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Tue Jan 09, 2018 6:57 pm

Struggling with pictures of a couple of buildings. 50 years have passed since the railway was there,and modern alterations have been done to the buildings looking at Street view on Google Maps. :(
Think artistic licence will have to be used :shock:
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Wed Jan 10, 2018 3:43 pm

:D :D :D Warm enough to go outside and spray what I have built so far in primer.
:( Discovered a few bits that looked fine that need fettling.
Just got to leave for 24hrs before I do anymore to those bits (like the primer to have properly dried )
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Wed Jan 10, 2018 10:02 pm

Nutter wrote::D :D :D Warm enough to go outside and spray what I have built so far in primer.
:( Discovered a few bits that looked fine that need fettling.
Just got to leave for 24hrs before I do anymore to those bits (like the primer to have properly dried )


Bits that need fine tuning are joins on the ridges of roofs and a couple of wall joints.
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby dkightley » Wed Jan 10, 2018 10:34 pm

Warm enough to go outside....

Yes. That surprised me...as I had to go up to Crich for a meeting. But the sun didn't last that long......clouded over mid afternoon, then went very gloomy!
Doug Kightley
Webmaster here and volunteer at the National Tramway Museum http://www.tramway.co.uk
User avatar
dkightley
 
Posts: 1049
Joined: Wed Nov 13, 2013 9:43 pm
Location: Nottingham, UK

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Thu Jan 11, 2018 11:35 am

:roll: :roll: back on the morphine patches so work back in slow mode.
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Fri Jan 12, 2018 7:11 pm

Bit more Work in Progress
DSCN0229.JPG
DSCN0229.JPG (156.48 KiB) Viewed 2999 times

DSCN0228.JPG
DSCN0228.JPG (141.94 KiB) Viewed 2999 times

DSCN0227.JPG
DSCN0227.JPG (166.95 KiB) Viewed 2999 times

DSCN0225.JPG
DSCN0225.JPG (152.14 KiB) Viewed 2999 times

DSCN0224.JPG
DSCN0224.JPG (187.14 KiB) Viewed 2999 times
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

Re: Severn Valley Railway - Ironbridge Station

Postby msimister » Sun Jan 14, 2018 11:02 am

It's looking good Mike. Certainly wouldn't knock it.
Malcolm
msimister
 
Posts: 79
Joined: Sun Jun 21, 2015 6:18 pm
Location: Melbourne, Australia

Re: Severn Valley Railway - Ironbridge Station

Postby Nutter » Sun Jan 14, 2018 6:48 pm

Next building in the sequence going from the pub towards Bridge Road now built.As it backs onto the wood I have used artistic licence regarding the back of it. Think there should be more of it like a second floor but cannot get a decent picture of it from google maps. :roll:
DSCN0234.JPG
DSCN0234.JPG (157.1 KiB) Viewed 2942 times

I don't want to build the modern structure that is behind where the goods shed was, so may leave a space there.
Work in progress on Bridge House which is the big house on the bend next to where the footbridge was.
Mike
DON'T knock it at least I am trying to do something, with only one good hand.
User avatar
Nutter
 
Posts: 472
Joined: Tue Feb 24, 2015 12:05 pm
Location: S E London

PreviousNext

Return to T Gauge Layouts

Who is online

Users browsing this forum: No registered users and 2 guests